Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
ESP32 in Arduino development environment
No, If you want to use Arduino for development, the only way to use such functionality is to use Arduino as IDF component.
No, If you want to use Arduino for development, the only way to use such functionality is to use Arduino as IDF component.
See lessSW_CPU_RESET in Espressif ESP32
“SW_CPU_RESET” is the software reset log. For example, calling the “esp_restart()” API will print this log.
“SW_CPU_RESET” is the software reset log. For example, calling the “esp_restart()” API will print this log.
See lessRenesas DA9063 sequence multiple PMICS
The DA9063-A is a flexible, scalable system PMIC capable of powering a wide range of multicore SoCs, FPGAs, memory subsystems, and peripherals. Full power tree management and multiple sleep modes result in a power-efficient system solution suitable for infotainment, telematics, and ADAS applicationsRead more
The DA9063-A is a flexible, scalable system PMIC capable of powering a wide range of multicore SoCs, FPGAs, memory subsystems, and peripherals. Full power tree management and multiple sleep modes result in a power-efficient system solution suitable for infotainment, telematics, and ADAS applications. The device includes eleven LDOs with programmable output voltages providing up to 300 milliamps and six high-current buck converters providing up to two and a half amps per buck. Any two bucks can be combined in a dual-phase configuration providing up to 5 amps.
See lessRenesas DA9062 – Drive current Requirement
The current is specified in the test conditions, the Voh and Vol is specified for a load of 1mA(for push-pull). The nRESET can be treated as the GPIO characteristics.
The current is specified in the test conditions, the Voh and Vol is specified for a load of 1mA(for push-pull).
The nRESET can be treated as the GPIO characteristics.
See lessRl78/G13 SPI continuous transfer
According to the RK78/G13 User's Manual, "Transfer end interrupt (in single-transfer mode) or buffer empty interrupt (in continuous transfer mode) can be selected". So in the single mode interrupt is generated after transmission of every byte, and in continuous mode it is generated once the buffer bRead more
According to the RK78/G13 User’s Manual, “Transfer end interrupt (in single-transfer mode) or buffer empty interrupt (in continuous transfer mode) can be selected“.
So in the single mode interrupt is generated after transmission of every byte, and in continuous mode it is generated once the buffer becomes empty.
See lessRTT Viewer in Renesas RA4M2 EVKIT
1. try Address range "0x20000000 0x2000" 2. try 'Terminal 0' instead of 'All Terminal' 3. close Rtt viewer , reconnect debugger and try open it again 4. if you have two boards , open the logs for another board and than the one with yours
1. try Address range “0x20000000 0x2000”
See less2. try ‘Terminal 0’ instead of ‘All Terminal’
3. close Rtt viewer , reconnect debugger and try open it again
4. if you have two boards , open the logs for another board and than the one with yours
LDO in bypass mode still controllable by sequencer
Yes, LDOs 3,4,7,8 and 11 can be set to bypass mode by setting LDO<x>_BYP register to (1) and by setting LDO<x>_AUTO to (1). In sequencing they follow LDO<x> _STEP timing. Please note: Voltage monitoring function cannot be used for any LDO in bypass mode.
Yes, LDOs 3,4,7,8 and 11 can be set to bypass mode by setting LDO<x>_BYP register to (1) and by setting LDO<x>_AUTO to (1). In sequencing they follow LDO<x> _STEP timing.
Please note: Voltage monitoring function cannot be used for any LDO in bypass mode.
See lesshttpd_uri: httpd_register_uri_handler: no slots left for registering handler
The solution can be seeing below: CODE: SELECT ALL esp_err_t init_webservice(char * base_path, httpd_handle_t * auxserver, rest_server_context_t * auxrest_context) { ... httpd_handle_t server = NULL; httpd_config_t config = HTTPD_DEFAULT_CONFIG(); config.max_uri_handlers = 10; config.uri_match_fn =Read more
The solution can be seeing below:
CODE: SELECT ALL
DA9062-EVAL1 default OTP and IC P/N
Let me answer your questions 1.) The part number changes slightly depending if the OTP of the part is programmed or not. DA9062-XXAM1 is for parts on a tray AMC are parts in T&R. We have some standard variants like: - DA9062-0AAM1 for Qualcom Atlas 7 (On tray) - DA9062-11AM1 Avnet MiniZed boardRead more
Let me answer your questions
1.) The part number changes slightly depending if the OTP of the part is programmed or not.
DA9062-XXAM1 is for parts on a tray AMC are parts in T&R.
We have some standard variants like:
– DA9062-0AAM1 for Qualcom Atlas 7 (On tray)
– DA9062-11AM1 Avnet MiniZed board
– DA9062-62AM1 i.MX6S Autoboot
– DA9062-A0AM1 In Circuit Programming Variant (this is an empty unprogrammed part)
Please note that the in case of an automotive option there is an additional -A at the end of the code. These parts will need to be programmed at factory to fulfill the AEC-Q100 etc requirements.
2.) On the EV Kit there is a preprogram that has following outputs.Buck1 1.38V, Buck 2 1.5V, Buck3 3.3V and buck 4 1.8V, LDO1 3.3V, LDO2 1.8V,LDO3 3.0V and LDO4 2.8V.
sequencing is slot1 LDO1, slot2 Buck1, slot3 Buck2, slot4 Buck3, slot5 Buck4, slot7 LDO 2 and 3, slot8 LDO4.Step time is set to 1,024ms.
3.) There is a switch on the mother board that defines a mode we call Power Commander (PC mode). This mode prevents normal or programmed OTP register transfer to softregister, instead it writes the soft registers from the selected INI-file You can create yourself with the GUI and edit as you wish and save it. This will not be programmed to the OTP but it can be used for testing etc.
4.) it is possible but one should be very careful and rememmber to turn on the power commander mode on, the switch. but you can do exactly pretty much the same with programmed part.
See lessSCI SPI MOSI at 3.7V instead of 3.3V
It seems that the motor driver board is sourcing voltage and current into the EVK.
It seems that the motor driver board is sourcing voltage and current into the EVK.
See less