Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How to assign automatically & dynamically the heap in esp32 at runtime?
There is no way to dynamically resize stack. You need to assign an amount that is large enough when you start the task.
There is no way to dynamically resize stack. You need to assign an amount that is large enough when you start the task.
See lessWhat is the difference Between SPI inside of SCI and Independent SPI ?
The SCI supports a so-called "Simple SPI" mode that has far less capability than the std SPI peripheral. From the hardware U/M: If your application requirements can be met by the Simple-SPI then it could be used.
The SCI supports a so-called “Simple SPI” mode that has far less capability than the std SPI peripheral. From the hardware U/M:
If your application requirements can be met by the Simple-SPI then it could be used.
See lessDisable and Enable all interrupts – RL78, CubeSuite ,CCRL
Use inline assembly for the EI / DI instructions, or use the intrinsic functions: This is from the help-file "Compiler-CCRL.chm" located in the folder "C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\Help".
Use inline assembly for the EI / DI instructions, or use the intrinsic functions:
This is from the help-file “Compiler-CCRL.chm” located in the folder “C:\Program Files (x86)\Renesas Electronics\CS+\CC\CC-RL\Help”.
See lessDA9063 ordering codes
DA9063: The PMIC number, -00: OTP identifier, HO/HK: Ball diaemeter(HO:0.45mm, HK:0.30mm), 1/2: shipment form(1: tray, 260, 2:T&R, 2500). The -00 will change as the OTP changes. If -A is included this mean the part is automotive qualified. if -AT this means the part is automotive qualified and hRead more
DA9063: The PMIC number, -00: OTP identifier, HO/HK: Ball diaemeter(HO:0.45mm, HK:0.30mm), 1/2: shipment form(1: tray, 260, 2:T&R, 2500).
The -00 will change as the OTP changes.
If -A is included this mean the part is automotive qualified.
if -AT this means the part is automotive qualified and has gone through high temperture testing.
If -A or -AT is not present, then the part is consumer/industrial grade. The functionalty is the same.
See lessReading CYW4343W Id through SDIO
What is the OS for 4343w reading ID ? if linux or Android reading ID process is included in the driver .
What is the OS for 4343w reading ID ? if linux or Android reading ID process is included in the driver .
Cypress TSSI tool
PFA is the TSSI tool for windows.
PFA is the TSSI tool for windows.
See lessModusTool or WICED Software Tool Development – CYW54907
You can use ModusToolbox environment for 54907. It supports CYW54907AEVAL1F kit.
You can use ModusToolbox environment for 54907. It supports CYW54907AEVAL1F kit.
See lessRTC battery supply
You can connect both battery and main supply to the RTC via a couple of diodes (or a more complex switching circuit).
You can connect both battery and main supply to the RTC via a couple of diodes (or a more complex switching circuit).
See lessRenesas RL78 [R5F102AA] UART Pin configuration
PIOR has to be used to change the function to TxD0/RxD0.
PIOR has to be used to change the function to TxD0/RxD0.
See lessUnable to debug Renesas RA6M4 using E2 Lite
Hi, Please check your below pin / connection is ok. 1. SWCLK 2. SWDIO 3. 3.3V 4. GND 5. RESET need pulled up and give small filter capacitor. 6. MD, need this pin as pullup. Please check this above pins and let me know if you have face any issues. Thanks & Regards Shivali Singh
Hi,
Please check your below pin / connection is ok.
1. SWCLK
2. SWDIO
3. 3.3V
4. GND
5. RESET need pulled up and give small filter capacitor.
6. MD, need this pin as pullup.
Please check this above pins and let me know if you have face any issues.
Thanks & Regards
Shivali Singh