Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
labs() function in RL78 MCU
Include <stdlib.h> to get the function prototype. long int __far labs(long int j);
Include <stdlib.h> to get the function prototype.
long int __far labs(long int j);
See lessDA9063 OTP Programming with DA9063-EVAL1
The switch on the left hand side should put the board into either programming mode or Power commander mode(emulation). Programming mode should enable the boost.
The switch on the left hand side should put the board into either programming mode or Power commander mode(emulation).
Programming mode should enable the boost.
See lessVoltage Tolerance of GPIOs of ESP chips
The voltage tolerance is 3.6 V.
The voltage tolerance is 3.6 V.
See lessDA9062 – Drive current Requirement
The current is specified in the test conditions, the Voh and Vol is specified for a load of 1mA(for push-pull). The nRESET can be treated as the GPIO characteristics.
The current is specified in the test conditions, the Voh and Vol is specified for a load of 1mA(for push-pull).
The nRESET can be treated as the GPIO characteristics.
See lessYield Function for Azure RTOS Threadx
The tx_thread_relinquish() API will yield control back to the scheduler and will permit other ready to run threads at the same priority or higher priority to run.
The tx_thread_relinquish() API will yield control back to the scheduler and will permit other ready to run threads at the same priority or higher priority to run.
See lessLDO in bypass mode still controllable by sequencer.
Yes, LDOs 3,4,7,8 and 11 can be set to bypass mode by setting LDO<x>_BYP register to (1) and by setting LDO<x>_AUTO to (1). In sequencing they follow LDO<x> _STEP timing. Please note: Voltage monitoring function cannot be used for any LDO in bypass mode.
Yes, LDOs 3,4,7,8 and 11 can be set to bypass mode by setting LDO<x>_BYP register to (1) and by setting LDO<x>_AUTO to (1). In sequencing they follow LDO<x> _STEP timing.
Please note: Voltage monitoring function cannot be used for any LDO in bypass mode.
See lessDifference between secure boot v1 and v2
Secure boot v1 is recommended for earlier versions than ESP32 ECO3,and secure boot v2 is recommended for ESP32 ECO3 and later versions, ESP32-C3, ESP32-S2, and ESP32-S3. Compared with secure boot v1, secure boot v2 has the following improvements which are: The bootloader and app use the same signatuRead more
Secure boot v1 is recommended for earlier versions than ESP32 ECO3,and secure boot v2 is recommended for ESP32 ECO3 and later versions, ESP32-C3, ESP32-S2, and ESP32-S3.
Compared with secure boot v1, secure boot v2 has the following improvements which are:
The bootloader and app use the same signature format. The bootloader and app use the same signing key.
See lessESP32 in Arduino development environment
No, If you want to use Arduino for development, the only way to use such functionality is to use Arduino as IDF component.
No, If you want to use Arduino for development, the only way to use such functionality is to use Arduino as IDF component.
See lessSW_CPU_RESET in Espressif ESP32
“SW_CPU_RESET” is the software reset log. For example, calling the “esp_restart()” API will print this log.
“SW_CPU_RESET” is the software reset log. For example, calling the “esp_restart()” API will print this log.
See lessRenesas DA9063 sequence multiple PMICS
The DA9063-A is a flexible, scalable system PMIC capable of powering a wide range of multicore SoCs, FPGAs, memory subsystems, and peripherals. Full power tree management and multiple sleep modes result in a power-efficient system solution suitable for infotainment, telematics, and ADAS applicationsRead more
The DA9063-A is a flexible, scalable system PMIC capable of powering a wide range of multicore SoCs, FPGAs, memory subsystems, and peripherals. Full power tree management and multiple sleep modes result in a power-efficient system solution suitable for infotainment, telematics, and ADAS applications. The device includes eleven LDOs with programmable output voltages providing up to 300 milliamps and six high-current buck converters providing up to two and a half amps per buck. Any two bucks can be combined in a dual-phase configuration providing up to 5 amps.
See less