Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
TCP support on the Renesas RA MCU platform.
In the configurator, you can just add the Free RTOS+TCP Library.
In the configurator, you can just add the Free RTOS+TCP Library.
See lessMainOsc operation in Deepstop mode differ according to OPJTAG configuration.
Do you have a demo program for the Mango hardware that would demonstrate the issue? This would certainly be concerning to be true. If you can provide at minimum a hex-file that can be loaded using RFP, and the different option byte settings for each of the above two cases that can changed independeRead more
Do you have a demo program for the Mango hardware that would demonstrate the issue? This would certainly be concerning to be true. If you can provide at minimum a hex-file that can be loaded using RFP, and the different option byte settings for each of the above two cases that can changed independently of the user program, I can have this checked by FAE.
See lessPurpose of Virtual channels in Renesas RH850 ADC
The virtual channels allow us to arrange physical channels in a scan group in any order. Since each virtual channel may be assigned to any physical channel, and scans are in numerical order by virtual channel. We can also assign virtual channels to multiplexed analog inputs. Read more
The virtual channels allow us to arrange physical channels in a scan group in any order. Since each virtual channel may be assigned to any physical channel, and scans are in numerical order by virtual channel. We can also assign virtual channels to multiplexed analog inputs.
Renesas RH850/P1x-C FCU Firmware
The FW is stored in a special area of the flash. The copy of the data from this area stored into the FCU RAM is either handled in the libraries or described in the flash hardware user's manual. For more details please contact: device_support.RH850-EU at lm.renesas.com
The FW is stored in a special area of the flash. The copy of the data from this area stored into the FCU RAM is either handled in the libraries or described in the flash hardware user’s manual. For more details please contact: device_support.RH850-EU at lm.renesas.com
See lessAUTOSAR MCAL Driver component User Manual for RH850F1x
Never mind, I found it nested in the software package. For other people's reference, the ADC MCAL manual was found in: Mcal_Rh850F1x\Supply\ASR_RH850_F1KM_4.02.00\X1X\F1x\modules\adc\user_manual .The pdf name was "R20UT3873EJ0102-AUTOSAR" making it harder to find in search.
Never mind, I found it nested in the software package. For other people’s reference, the ADC MCAL manual was found in: Mcal_Rh850F1x\Supply\ASR_RH850_F1KM_4.02.00\X1X\F1x\modules\adc\user_manual .The pdf name was “R20UT3873EJ0102-AUTOSAR” making it harder to find in search.
See lessRenesas RH850/P1x Clock Configuration & Control Register Details
Please take a glance to the diagram 12.1 in the User's Manual: There are two clock output pins available (0 & 1). Therefore, also two sets of registers are available.
Please take a glance to the diagram 12.1 in the User’s Manual: There are two clock output pins available (0 & 1). Therefore, also two sets of registers are available.
See lessDifference between Renesas RH850G3K and Renesas RH850G3KH core?
RH850G3H Core has RH850/F1L (elder series) with max. 96MHz in 5 Stage pipeline, no FPU, MPU (4 areas)while RH850G3KH core has RH850/F1K (newer series) with max. 240MHz in 5 Stage pipeline, FPU, MPU (16 areas).
RH850G3H Core has RH850/F1L (elder series) with max. 96MHz in 5 Stage pipeline, no FPU, MPU (4 areas)while RH850G3KH core has RH850/F1K (newer series) with max. 240MHz in 5 Stage pipeline, FPU, MPU (16 areas).
See lessBLE connectivity range for ESP32 module with embedded antenna.
Hi VSHARMA, (ESP32 chip)Range: BLE v4.2 range test can reach 200m and BLE5.0 can reach approximately 500m.
Hi VSHARMA,
(ESP32 chip)Range: BLE v4.2 range test can reach 200m and BLE5.0 can reach approximately 500m.
See lessMultisocket commands sequence for GL865
HI, Please check below sequence tested ATE1 OK ati4 GL865 DUAL V3 OK ATI0 332 OK AT+CGSN 358943050553907 OK AT#CIMI #CIMI: 404450935168282 OK AT+CCID ERROR AT#BND=? #BND: (0-3) OK AT#BND? #BND: 0 OK AT+CGMI Telit OK AT+CGMM GE910-QUAD OK AT+CGMR 13.01.000 OK AT+CPIN? +CPIN: READY OK AT#SELINT=2 OK ARead more
HI,
Please check below sequence tested
ATE1
OK
ati4
GL865 DUAL V3
OK
ATI0
332
OK
AT+CGSN
358943050553907
OK
AT#CIMI
#CIMI: 404450935168282
OK
AT+CCID
ERROR
AT#BND=?
#BND: (0-3)
OK
AT#BND?
#BND: 0
OK
AT+CGMI
Telit
OK
AT+CGMM
GE910-QUAD
OK
AT+CGMR
13.01.000
OK
AT+CPIN?
+CPIN: READY
OK
AT#SELINT=2
OK
AT+CMEE=2
OK
AT+COPS?
+COPS: 0,0,”airtel”
OK
AT+CREG?
+CREG: 0,1
OK
AT+CGREG?
+CGREG: 0,1
OK
AT#SIMDET?
#SIMDET: 2,1
OK
AT#QSS
+CME ERROR: operation not supported
AT#QSS?
#QSS: 0,1
OK
AT+CGDCONT=1,”IP”,”airtelgprs.com”
OK
AT#SKIPESC=1
OK
AT#SCFG=1,1,300,90,60,50
OK
AT#SCFG=2,1,300,90,60,50
OK
AT#SGACT=1,1
#SGACT: 100.93.188.245
OK
AT#SD=1,0,80,”www.google.co.in”,0,0,1
OK
AT#SSEND=1
> Hello Accord
OK
AT#SD=2,0,5001,”164.164.96.183″,0,0,1
OK
AT#SSEND=2
> Hello Accord2
OK
AT#SI
#SI: 1,12,0,0,0
#SI: 2,13,0,0,0
#SI: 3,0,0,0,0
#SI: 4,0,0,0,0
#SI: 5,0,0,0,0
#SI: 6,0,0,0,0
OK
NO CARRIER
AT#SGACT?
#SGACT: 1,1
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,1,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
NO CARRIER
AT+CGDCONT=2,”IP”,”airtelgprs.com”
OK
AT#SKIPESC=1
OK
AT#SCFG=2,2,300,90,60,50
+CME ERROR: wrong mode
AT#SGACT=2,1
#SGACT: 100.91.158.74
OK
AT#SH=1
OK
AT#SGACT=1,0
OK
AT#SGACT=2,0
OK
AT#SGACT?
#SGACT: 1,0
#SGACT: 2,0
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,1,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT+CGDCONT?
+CGDCONT: 1,”IP”,”airtelgprs.com”,””,0,0
+CGDCONT: 2,”IP”,”airtelgprs.com”,””,0,0
OK
AT+CGDCONT=2
OK
AT+CGDCONT?
+CGDCONT: 1,”IP”,”airtelgprs.com”,””,0,0
OK
AT+CGDCONT=1
OK
AT+CGDCONT?
OK
AT+CGDCONT=2,”IP”,”airtelgprs.com”
OK
AT#SCFG=2,2,300,90,60,50
OK
AT+CGDCONT=1,”IP”,”airtelgprs.com”
OK
AT#SCFG=1,1,300,90,60,50
OK
AT#SCFG=2,2,300,90,60,50
OK
AT+CGDCONT=2
OK
AT+CGDCONT=1
OK
AT+CGDCONT?
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,2,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT#SGACT=1,0
OK
AT#SGACT=2,0
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,2,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT+CGDCONT=1,”IP”,”airtelgprs.com”
OK
AT+CGDCONT=2,”IP”,”airtelgprs.com”
OK
AT#SCFG=1,1,300,90,60,50
OK
AT#SCFG=2,2,300,90,60,50
OK
AT#REBOOT
OK
AT#SH=1
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,2,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT#SCFG=2,1,300,90,60,50
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,1,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT+CGDCONT=1,”IP”,”airtelgprs.com”
OK
AT#SCFG=1,1,300,90,60,50
OK
AT+CGDCONT=2,”IP”,”airtelgprs.com”
OK
AT#SCFG=2,2,300,90,60,50
OK
AT#SCFG=2,2,300,90,60,50
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,2,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
¦üAT+CGMR
13.01.000
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,2,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
þNAT+CGMR
13.01.000
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,2,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT#SCFG=2,2,300,90,60,50
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,2,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT#SCFG=2,1,300,90,60,50
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,1,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT#SCFG?
#SCFG: 1,1,300,90,60,50
#SCFG: 2,1,300,90,60,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT+CGDCONT=1,”IP”,”airtelgprs.com”
OK
AT#SCFG=1,1,300,90,60,50
OK
AT+CGDCONT=2,”IP”,”airtelgprs.com”
OK
AT#SCFG=2,2,300,90,60,50
OK
AT#SD=1,0,10510,”modules.telit.com”,0,0,0
ERROR
AT#SH=1
OK
AT#SD=1,0,80,”www.google.com”,0,0,0
ERROR
AT+CGDCONT=1,”IP”,”airtelgprs.com”
OK
AT#SKIPESC=1
OK
AT#SCFG=1,1,300,90,60,50
OK
AT#SGACT=1,1
#SGACT: 100.66.126.163
OK
AT#SD=1,0,80,”www.google.com”,0,0,0
CONNECT
OK
See lessRegisters used for Renesas RL78 Family
Hello Linto, The Register TDR00 for frequency(Period) i.e. called Master and the Register TDR01 for Duty i.e. called slave in timer.c file. Thanks & Regards Shivali Chauhan
Hello Linto,
The Register TDR00 for frequency(Period) i.e. called Master and the Register TDR01 for Duty i.e. called slave in timer.c file.
Thanks & Regards
Shivali Chauhan
See less