We have developed 2kW PFC Board with ICE3PCS01G. When I did first power on with 12.15VDC, Vref not coming from IC. After that I replace the new chip, then it worked fine. But again after changing the nearest components during ...Read more
Welcome, to the community! Yes, the newer STP16CPC05 can replace the older STP16CPC26 and contains some advancements that make component selection easier (smaller bypass capacitor possible) or the slightly advanced maximum driver current. Does it answer your question? Regards
Welcome, to the community!
Yes, the newer STP16CPC05 can replace the older STP16CPC26 and contains some advancements that make component selection easier (smaller bypass capacitor possible) or the slightly advanced maximum driver current.
Does it answer your question?
Regards
See less
Thanks for your Question. For the IC, the turn-on voltage is between 11.5~12.9V, turn of is between 10.5~11.9V. So, for 12.15V, if the Vcc is from 12.9V down to it, the IC will run. If VCC is from 10V up to 12.15V, the IC is off and can't work.
Thanks for your Question.
For the IC, the turn-on voltage is between 11.5~12.9V, turn of is between 10.5~11.9V.
So, for 12.15V, if the Vcc is from 12.9V down to it, the IC will run. If VCC is from 10V up to 12.15V, the IC is off and can’t work.
See less