We have developed 2kW PFC Board with ICE3PCS01G. When I did first power on with 12.15VDC, Vref not coming from IC. After that I replace the new chip, then it worked fine. But again after changing the nearest components during ...Read more
We have developed 2kW PFC Board with ICE3PCS01G.
When I did first power on with 12.15VDC, Vref not coming from IC. After that I replace the new chip, then it worked fine. But again after changing the nearest components during troubleshooting, the same problem came (vref gone), But ICOMP=5V is coming. 4 nos of IC got damaged and the same problem coming.
please suggest a solution.
Read less
Thanks for your Question. For the IC, the turn-on voltage is between 11.5~12.9V, turn of is between 10.5~11.9V. So, for 12.15V, if the Vcc is from 12.9V down to it, the IC will run. If VCC is from 10V up to 12.15V, the IC is off and can't work.
Thanks for your Question.
For the IC, the turn-on voltage is between 11.5~12.9V, turn of is between 10.5~11.9V.
So, for 12.15V, if the Vcc is from 12.9V down to it, the IC will run. If VCC is from 10V up to 12.15V, the IC is off and can’t work.
See less