What are the settings required to achieve 1Mbps speed while working on Renesas RAL21. I am working on Renesas RA2L1, 48 pin controller part#R7FA2L1A93CFL with FSP version 3.5.0. I am unable to achieve 1Mbps speed.
What are the settings required to achieve 1Mbps speed while working on Renesas RAL21. I am working on Renesas RA2L1, 48 pin controller part#R7FA2L1A93CFL with FSP version 3.5.0. I am unable to achieve 1Mbps speed.
Read less
I have attached workspace for UART done on RA2L1 and FSP v3.5.0 to set BR- 1000000. Please make sure your USB to TTL convertor supported with 1MBps speed. You need to see Baud rate modulation is enabled and set the BR to 1000000, refer below snap Please go through the HW manual of RA2L1 to check theRead more
I have attached workspace for UART done on RA2L1 and FSP v3.5.0 to set BR- 1000000. Please make sure your USB to TTL convertor supported with 1MBps speed.
You need to see Baud rate modulation is enabled and set the BR to 1000000, refer below snap
Please go through the HW manual of RA2L1 to check the UART error rate calculation.
See less