Home/e2 studio

volt.tech Latest Questions

Alex thomas
  • 0
Alex thomas
Asked: January 23, 2023In:
  • 0

Hello, We are changing a product from a Community to an RA processor. Can we use the same E2 Studio and switch between SSP and FSP? We’ll have times when we are doing maintenance on the Community product and also doing ...Read more

Hello,

We are changing a product from a Community to an RA processor. Can we use the same E2 Studio and switch between SSP and FSP? We’ll have times when we are doing maintenance on the Community product and also doing dev on the new RA board.

Is there a specific version of E2 that can do this?

Does it make sense, or should we’ve two different E2 setups?

Thanks

 

Read less
e2 studiofspmcuprocessorrarenesasssp
  1. nidhi singh

    Hi Alex, The FSP and SSP releases are at a different meter and each version released is tested/ qualified against a specific version of e2-studio. The distribution download of the platform installer will ensure that the proper version of e2-studio will be with the FSP/ SSP version. I advise that youRead more

    Hi Alex,

    The FSP and SSP releases are at a different meter and each version released is tested/ qualified against a specific version of e2-studio. The distribution download of the platform installer will ensure that the proper version of e2-studio will be with the FSP/ SSP version. I advise that you command a different and specific installation for SSP and FSP.

    Thanks & Regards
    Nidhi

    See less
    • 0
nidhi singh
  • 0
nidhi singh
Asked: September 14, 2022In:
  • 0

Hello, I’m using RA2L1 and E2 Studio. I want to use UART without interrupt. How can i read and transmit datas?

Hello,

I’m using RA2L1 and E2 Studio. I want to use UART without interrupt. How can i read and transmit datas?

Read less
e2 studiointerruptra2l1renesasuart
  1. ashishgawade

    It's possible, but you won't be suitable to use the Read and Write API as handed. You'll have to produce your own which will poll the flags of the SCI SSR( Serial Communications Interface Serial Status Register) You would have to pend on the RDRF for data reception, and TDRE( & potentially TEND)Read more

    It’s possible, but you won’t be suitable to use the Read and Write API as handed. You’ll have to produce your own which will poll the flags of the SCI SSR( Serial Communications Interface Serial Status Register)

    You would have to pend on the RDRF for data reception, and TDRE( & potentially TEND) for data transmission.

    See less
    • 0
vikas Nagpal
  • 0
vikas Nagpal
Asked: June 18, 2022In:
  • 0

Can we use e2 emulator Lite debugger for debugging Renesas RL78/F13 MCU applications with e2 studio and GCC RL78 compiler ?

Can we use e2 emulator Lite debugger for debugging Renesas RL78/F13 MCU applications with e2 studio and GCC RL78 compiler ?

Read less
debuggere2 emulatore2 studiomcurenesasRenesas RL78/F13 MCUrl78/f13
  1. Rahul B

    Hello Mr. Vikas, Yes you can use E2 lite debugger to debug RL78 MCU with e2studio and CCRL compiler. But we recommend to use Renesas  Cube suite with CCRL Compiler for RL78/F13 series MCU.  

    Hello Mr. Vikas,

    • Yes you can use E2 lite debugger to debug RL78 MCU with e2studio and CCRL compiler.
    • But we recommend to use Renesas  Cube suite with CCRL Compiler for RL78/F13 series MCU.

     

    See less
    • 0
dev krishnan
  • 0
dev krishnan
Asked: June 13, 2022In:
  • 0

While using Renesas R7FA6E10F2CFP with an E2/E2-lite programmer and JTAG programming interface. I am programming through E2 studio. As it stands I can not establish communication with the MCU. Every time I try to program the device I get the ...Read more

While using Renesas R7FA6E10F2CFP with an E2/E2-lite programmer and JTAG programming interface. I am programming through E2 studio. As it stands I can not establish communication with the MCU. Every time I try to program the device I get the following errors:
Error 0x0003080A: The specified emulator has already been used.

Error 0x0003080E: External power is supplied to the user system.

I have verified connectivity from the MCU and the programming connector pins.

Read less
connector pinse2 programmere2 studiojtagmcurenesas r7fa6e10f2cfp
  1. pallavi sharma

    Are you using a Renesas reference design, or is this custom hardware?  Have you checked your connection with the document E2 Emulator, E2 Emulator Lite Additional Document for User's Manual (Notes on Connection of RA Devices)? Which tool are you using - E2 or E2-lite?  This matters, because the E2 sRead more

    Are you using a Renesas reference design, or is this custom hardware?  Have you checked your connection with the document E2 Emulator, E2 Emulator Lite Additional Document for User’s Manual (Notes on Connection of RA Devices)?

    Which tool are you using – E2 or E2-lite?  This matters, because the E2 supports both JTAG & SWD while E2-Lite only supports SWD.  From On-chip Debuggers Performance Property:

      

    See less
    • 0