Home/cyt2b7

volt.tech Latest Questions

ashishgawade
  • 0
ashishgawade
Asked: December 2, 2022In:
  • 0

Hii, We’re using the below-mentioned IC in our design. While trying to flash the same using J Link Debugger Plus from Segger, the GUI of the tool asks to select the microcontroller from the drop-down list. But Under the OEM, Infineon, ...Read more

Hii,

We’re using the below-mentioned IC in our design. While trying to flash the same using J Link Debugger Plus from Segger, the GUI of the tool asks to select the microcontroller from the drop-down list.
But Under the OEM, Infineon, the CYT2B7 series isn’t displayed. Hence we’re unable to select the target device from the GUI. Without selecting the target device, unable to proceed further with the flashing.

Hence I kindly request you to help me in this regard at the earliest.
CYT2B73CADQ0AZEGS  –  ARM Microcontrollers – Auto MCU

Read less
cyt2b7cyt2b73cadq0azegsdebuggerIClinkmcumicrocontrollerssegger
  1. [Deleted User]

    For connecting the device, you can enter the full device name with core i.e. Device> CYT2B73CAD_M0 or CYT2B73CAD_M4. or after getting the pop communication in the below-attached image, you can click on the" OK" tab and select a proper device with core and then click" OK". Refer to the below snippRead more

    For connecting the device, you can enter the full device name with core i.e. Device> CYT2B73CAD_M0 or CYT2B73CAD_M4.

    or after getting the pop communication in the below-attached image, you can click on the” OK” tab and select a proper device with core and then click” OK”. Refer to the below snippet.

    Thanks & Regards

    Vikas

     

    See less
    • 0