How to make input or output pin without code generator in Renesas RL78 CS+CC IDE.
How to make input or output pin without code generator in Renesas RL78 CS+CC IDE.
Read less
;----------------------------------------------------------------------------- ;hdwinit ; Specify RAM addresses suitable to your system if needed. ;----------------------------------------------------------------------------- LOCAL_RAM_ADDR .set 0xFEBE0000 ; for MCU : R7f701684 LOCAL_RAM_END .set 0xRead more
;—————————————————————————–
;hdwinit
; Specify RAM addresses suitable to your system if needed.
;—————————————————————————–
LOCAL_RAM_ADDR .set 0xFEBE0000 ; for MCU : R7f701684
LOCAL_RAM_END .set 0xFEBF7FFF ; for MCU : R7f701684
RETENTION_RAM_ADDR .set 0xFEBF8000 ; for MCU : R7f701684/R7f701690 ; 0xFEBE0000
RETENTION_RAM_END .set 0xFEBFFFFF ; for MCU : R7f701684/R7f701690 ; 0xFEBF7FFF
Dear Raja, Please check the below instruction to make input and output without code generator. PM1_bit.no0 = 0; // 0 mean Ouput make, 1 means Input make P1_bit.no = 1; // high pin // Port Pin P10 Please feel free to write us for further support. Thanks & Regards Shivali Singh AppliRead more
Dear Raja,
Please check the below instruction to make input and output without code generator.
PM1_bit.no0 = 0; // 0 mean Ouput make, 1 means Input make
P1_bit.no = 1; // high pin // Port Pin P10
Please feel free to write us for further support.
Thanks & Regards
Shivali Singh
Application Engineer
See less