Hello! It sounds like you’re having trouble connecting your ESP32 S3 to WiFi and creating an access point. There could be a few different issues causing this, but here are a few things you could check:

1. Make sure you are using the correct WiFi credentials. Double-check the SSID and password you are using to connect to the WiFi network. If you’re not sure, try connecting to a different WiFi network with known credentials to see if that works.
2. Check that your antenna is properly connected to the ESP32 S3. Make sure the antenna is securely attached and that the connection is not loose. You could also try using a different antenna to see if that solves the problem.
3. Check your code to ensure that you are properly configuring the ESP32 S3 to connect to the WiFi network or create an access point. Make sure you are using the correct libraries and functions to connect to WiFi and create an access point.
4. Check the power supply to your ESP32 S3. Make sure it is receiving enough power to operate properly. You could try using a different power source or adding a capacitor to help stabilize the power supply.
5. Try resetting your ESP32 S3 to its default settings. This can sometimes help clear up any configuration issues that may be causing the problem.

I hope these suggestions help you get your ESP32 S3 up and running! Let me know if you have any further questions.

Thank You