Hi I am as of now working on a venture using stwlc38.
I am using it in conjunction with a control administration IC, MAX17330.
The circuit is simple, VOUT and system power is associated and ordinarily I use it to release the battery which is connected to MAX17330 Ic, but when the stwlc38 chip recognizes the remote charging and sends the output to VOUT, MAX17330 Ic receives the output and charges the battery.
There is a issue in this part When the system voltage connected to the VOUT pin is 3.05V or less, it recognizes that it is charging well.
When the voltage is higher than 3.05V, it does not recognize that it is connected to TX (op mode is fixed to 1).
Do you know of any settings or workarounds related to this?
Hello @Molly Wilson This is since when wlc38 vout is high than 3.05V, RX chip is working and default it is in SA mode. I think you require to include a few hardware between RX VOUT and MAX17330, for example diode. This will make RX voltage as it were forward to MAX17330, can not switch voltage fromRead more
Hello Molly Wilson Wilson
This is since when wlc38 vout is high than 3.05V, RX chip is working and default it is in SA mode.
I think you require to include a few hardware between RX VOUT and MAX17330, for example diode.
This will make RX voltage as it were forward to MAX17330, can not switch voltage from MAX17330
Thank You
See lessHi This is since when wlc38 vout is tall than 3.05V, RX chip is working and default it is in SA mode. I think you require to include some hardware between RX VOUT and MAX17330, for example diode. This will make RX voltage as it were forward to MAX17330, can not reverse voltage from MAX17330
Hi
This is since when wlc38 vout is tall than 3.05V, RX chip is working and default it is in SA mode.
I think you require to include some hardware between RX VOUT and MAX17330, for example diode.
This will make RX voltage as it were forward to MAX17330, can not reverse voltage from MAX17330
See less