Can the RA4M1 UART control the RE/DE signal for a RS485 line driver in equipment, or does FSP control it in software?
Can the RA4M1 UART control the RE/DE signal for a RS485 line driver in equipment, or does FSP control it in software?
Read lessSign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
You must login to ask question.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
Can the RA4M1 UART control the RE/DE signal for a RS485 line driver in equipment, or does FSP control it in software?
Can the RA4M1 UART control the RE/DE signal for a RS485 line driver in equipment, or does FSP control it in software?
Read lessHi, I’m using a double core psoc63 and BLE is on core M0p and this core stores BLE holding list in “cy_em_eeprom” (0x14000000 size 0x8000). My question is this locale is accessible too from CM4? In the to begin with generation of our ...Read more
Hi,
I’m using a double core psoc63 and BLE is on core M0p and this core stores BLE holding list in “cy_em_eeprom” (0x14000000 size 0x8000).
My question is this locale is accessible too from CM4?
In the to begin with generation of our board, due an error of generating hex record this locale is empty and we need to fix it on the field over the discuss from application on CM4.
Thanks
Read lessInput devices serve as the gateway between users and their digital environments, facilitating efficient interaction and communication with computers and electronic devices. From keyboards and mice to touchscreens and styluses, these peripherals play a crucial role in enhancing productivity, creativity, ...Read more
Input devices serve as the gateway between users and their digital environments, facilitating efficient interaction and communication with computers and electronic devices. From keyboards and mice to touchscreens and styluses, these peripherals play a crucial role in enhancing productivity, creativity, and accessibility. Whether it’s typing documents, navigating graphical interfaces, or controlling multimedia content, the right input device can streamline workflows and empower users to accomplish tasks with precision and ease. Explore the diverse range of input devices available, and discover how they optimize user experiences in today’s interconnected world. Upgrade your input devices to unlock new levels of efficiency and performance!
Read lessHello, Input devices play a crucial role in modern computing by enabling users to interact with computers and input information or commands. The efficiency of input devices directly impacts user productivity, comfort, and overall computing experience. Let's explore the significance of input devicesRead more
Hello,
Input devices play a crucial role in modern computing by enabling users to interact with computers and input information or commands. The efficiency of input devices directly impacts user productivity, comfort, and overall computing experience. Let’s explore the significance of input devices and their role in unlocking efficiency in modern computing.
Efficiency in input devices is achieved by considering factors like comfort, responsiveness, accuracy, customization, and compatibility with different software applications. By leveraging well-designed input devices tailored to specific user needs, individuals can work faster, reduce errors, and enhance their overall computing experience, ultimately unlocking greater efficiency in their tasks.
Thank You
Hello,I have collected PFC and LLC circuit of STDES-3KWTLCP reference design. I followed the method as described in the document to amass entirety circuit. When we gave AC voltage to PFC, resistance R154 gets warm up and in the long ...Read more
Hello,
I have collected PFC and LLC circuit of STDES-3KWTLCP reference design. I followed the method as described in the document to amass entirety circuit. When we gave AC voltage to PFC, resistance R154 gets warm up and in the long run burn out. I double checked all the components value and their placement but couldn’t discover the cause for this behavior.
Can anybody if it’s not too much trouble help us in finding which part of the circuit or component is making this issue so that it would offer assistance us in correcting the cause?
Thank You
Read lessHello, Well, if R154 gets as well hot, there will clearly be as well much current streaming through it. If you don't mind check C161 and its cover. At that point moreover check the signals on PWM1, PWM2 and OUT1, OUT2 on U105. Regards
Hello,
Well, if R154 gets as well hot, there will clearly be as well much current streaming through it. If you don’t mind check C161 and its cover. At that point moreover check the signals on PWM1, PWM2 and OUT1, OUT2 on U105.
Regards
See lessHello Everybody, I am working on EK-RA4M2 board and a few how from recently i am incapable to streak anything on my target board since of Trustzone Read more
Hello Everybody,
I am working on EK-RA4M2 board and a few how from recently i am incapable to streak anything on my target board since of Trustzone setup blunder.
Whenever i attempted to investigate it i am getting this blunder that erasmus erros occured in the gadget (Boot blunder code: 0xe5). if you don’t mind arrange the trustzone settings usinf renesess gadget segment chief.
I attempted to initialise the gadget back to manufacturing plant defult utilizing renesses gadget parcel supervisor but i am getting mistake Fizzled. SCI boot communication setting blunder has occurred.
can anybody offer assistance to unravel this issue.
Thanks and Respects,
Read lessHello, You are utilizing the on-board Jlink, right? The SCI boot mode is entered when the emulator powers the MD pin low whereas discharging the reset pin. The onboard JLink supports a UART mode to connect. It might be as basic as resetting the board through the red button after interfacing the USBRead more
Hello,
You are utilizing the on-board Jlink, right? The SCI boot mode is entered when the emulator powers the MD pin low whereas discharging the reset pin. The onboard JLink supports a UART mode to connect. It might be as basic as resetting the board through the red button after interfacing the USB cable. In the Gadget Partition Manager, try checking “Set Trustzone secure/non-secure boundaries” too.
Regards,
Ashish
See lessHello, Microcontrollers play a vital role in optimizing power consumption to extend battery life in battery-powered devices. Here are some common techniques used by microcontrollers to achieve power optimization: Sleep Modes Clock Management Peripheral Control Power Modes Interrupts and Event-DrivenRead more
Hello,
Microcontrollers play a vital role in optimizing power consumption to extend battery life in battery-powered devices. Here are some common techniques used by microcontrollers to achieve power optimization:
It’s important to note that the specific power optimization techniques available and their effectiveness can vary depending on the microcontroller’s architecture and features. Hope this is helpful for you.
Thank You
Ella
See lessHello, We use the ESD114U102ELE6327XTMA1 ultra-low capacitance TVS diode on numerous of our PCB’s. The item status for this diode is “not for modern design”. Is Infineon developing a drop-in replacement? If not, can you suggest a substitute? Thank you!
Hello,
We use the ESD114U102ELE6327XTMA1 ultra-low capacitance TVS diode on numerous of our PCB’s. The item status for this diode is “not for modern design”. Is Infineon developing a drop-in replacement? If not, can you suggest a substitute? Thank you!
Read lessHi, Unfortunately, none of the TVS diodes in that table is a drop-in replacement for the ESD114U102ELE6327XTMA1. You can attempt Texas Instruments TPD1E05U06DPYR. The Texas Instruments TPD1E05U06DPYR has the same footprint and similar specifications to the ESD114U102ELE6327XTMA1 ultra-low capacitancRead more
Hi,
Unfortunately, none of the TVS diodes in that table is a drop-in replacement for the ESD114U102ELE6327XTMA1. You can attempt Texas Instruments TPD1E05U06DPYR. The Texas Instruments TPD1E05U06DPYR has the same footprint and similar specifications to the ESD114U102ELE6327XTMA1 ultra-low capacitance TVS diode. You will be testing to confirm it is a reasonable replacement.
Thank You
See lessHow does the number of CPU cores affect gaming performance, and are there any particular games or genres that benefit more from higher core counts?
How does the number of CPU cores affect gaming performance, and are there any particular games or genres that benefit more from higher core counts?
Read lessHello, Titles like open-world games, strategy games, and simulations benefit greatly from CPUs with higher core and thread counts. With more cores and threads, your CPU can handle game-related calculations and background tasks concurrently, resulting in smoother gameplay and faster load times. ThankRead more
Hello,
Titles like open-world games, strategy games, and simulations benefit greatly from CPUs with higher core and thread counts. With more cores and threads, your CPU can handle game-related calculations and background tasks concurrently, resulting in smoother gameplay and faster load times.
Thank You
See lessHello,I have a custom board with a STWLC38JRM.Everything was fine and I was able to flash it with STSW-WPSTUDIO v1.8.4 through the dev board STEVAL-WLC38RX and FT_SDA/FT_SCL/VBUS/AGND pins.I attempt to make a few test and I disabled internal over temperature ...Read more
Hello,
I have a custom board with a STWLC38JRM.
Everything was fine and I was able to flash it with STSW-WPSTUDIO v1.8.4 through the dev board STEVAL-WLC38RX and FT_SDA/FT_SCL/VBUS/AGND pins.
I attempt to make a few test and I disabled internal over temperature security in config. After that, I’m not able to connect to the STWLC38JRM once more. I attempted the chip with “RX” and “Empty” in WPSTUDIO without any victory. I as of now had a similar issue and the chip was in Empty state.
Is it possible to “factory reset” the chip without I2C link ?
Thank you.
Read lessHi.We as it were utilize I2C to upgrade fw, it would be ideal if you make sure FT260 dongle is ok , about GUI connect issues, i propose you use a1_wlc38_downfw.bat to download fw automatic. Also it would be ideal if you check GUI log and post it if still fail. Thank You
Hi.
We as it were utilize I2C to upgrade fw, it would be ideal if you make sure FT260 dongle is ok ,
about GUI connect issues, i propose you use
a1_wlc38_downfw.bat to download fw automatic.
Also it would be ideal if you check GUI log and post it if still fail.
Thank You
Hi Everyone.We are working on a radar level sensor. What we particularly need is to utilize the Bluetooth include. In any case, we will wake up the esp, take measurements and put it back to sleep. We aim to keep ...Read more
Hi Everyone.
We are working on a radar level sensor. What we particularly need is to utilize the Bluetooth include. In any case, we will wake up the esp, take measurements and put it back to sleep. We aim to keep the current drawn at this measurement moment low. (Profound sleep current is moreover imperative, but the current at the time of estimation is moreover in our hands. Which product of yours would you suggest that can draw the least current at this moment of operation?
Read lessHii, If you as it were take the estimation to accumulate them to later send as a batch, any chip with a low-power coprocessor may be able to do that; that CPU tends to utilize a fraction of what the main chip uses. I'd recommend the ESP32-C6 in specific for that as we improved the low-power coprocesRead more
Hii,
If you as it were take the estimation to accumulate them to later send as a batch, any chip with a low-power coprocessor may be able to do that; that CPU tends to utilize a fraction of what the main chip uses. I’d recommend the ESP32-C6 in specific for that as we improved the low-power coprocessor by a lot in that chip. If you moreover require to send each estimation over BTLE, the choice gets to be a bit more muddied; you might too utilize an ESP32-C3 or indeed ESP32-S3 in that case. If you require BT Classic, the ‘original’ ESP32 is your as it were choice.
Thank You
Nidhi
Hello, You can characterize WFLASH eeprom locale in M4 application and upgrade it on filed. If you don't mind attempt at your end and let me know the comes about. Thanks Sachin
Hello,
You can characterize WFLASH eeprom locale in M4 application and upgrade it on filed. If you don’t mind attempt at your end and let me know the comes about.
Thanks
Sachin
See less