The MCU is RA2L1.I encountered a issue when I applied QE for Capacitive Touch( V3.1.0) to make tuning.
At the end, it said
At the end, it said
TSCAP voltage error. Please check and review the design of the Target Board.
Failed to tuning.
Does anyone know why?
The TSCAP pin is tied to a capcitor. Is it incorrect?
On reflection, you are having an issue with tuning, The tuning process is part of QE and the tuning "code" is download TSCAP ( P1.12 on the RA2L1 MCU ) should be connected to ground via a 10nF capacitor. Have you enabled the TSCAP pin in the FSP pin configuration?
On reflection, you are having an issue with tuning, The tuning process is part of QE and the tuning “code” is download
TSCAP ( P1.12 on the RA2L1 MCU ) should be connected to ground via a 10nF capacitor.
Have you enabled the TSCAP pin in the FSP pin configuration?