Hi
We’ve to get our hardware certified in a number of different countries. And to meet the certification process the ESP software will need to configure our hardware to different functional countries as there are a number of software-controlled DC/ DC inventories on the hardware.
The challenge is that Espressif just supplies the FCC test software as a binary. I’ve communicated with Espressif to know if I can get the source code or in the binary library so that I can incorporate it into our test code, and they replied that won’t supply the code.
Does anyone know how to put the ESP32 into the needed modes for the certification process?
Regards
Hi, Do all possible noise sources have to be enabled during purposeful radiator testing or just those directly coupled to the antenna? Obviously, there is some possibility of dealings between purposeful and unintentional radiator sources. This is how we get stuff like FCC complete modular instrumentRead more
Hi, Do all possible noise sources have to be enabled during purposeful radiator testing or just those directly coupled to the antenna? Obviously, there is some possibility of dealings between purposeful and unintentional radiator sources. This is how we get stuff like FCC complete modular instrument taking rf shielding and internal regulation. The unintentional radiator sources would be tested independently with purposeful radiators powered off. This may be different from other official authorities.
Obviously, espressif should give some support similar to allowing gpio control or Lua/upython scripting in the test binary or releasing a library that can be incorporated into IDF designs. perhaps too important fear of CW mode being turned into a jammer? At least it should be available under NDA and usage agreement.
See less