Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
Hello,
I have the A/D in a RA4M1 set to studied AN0 to AN14 when activated by GPT0, 1600 times a second.
I would too like to read the temperature sensor (though that doesn’t necessarily have to be done quite so regularly).
Reading the manual tells me that ANANSA has to be cleared, removing my existing settings, in arrange to read the temperature sensor.
What’s the best way to continue?
Thank You
Hi Jason, I learned that the TSN can be studied as it were in single filter mode (I utilized RA4M1, not beyond any doubt if this is genuine for your MCU). The idea was to switch between the group check for analog inputs and the single filter for TSN reading. A work-around utilizing DTC information eRead more
Hi Jason,
I learned that the TSN can be studied as it were in single filter mode (I utilized RA4M1, not beyond any doubt if this is genuine for your MCU). The idea was to switch between the group check for analog inputs and the single filter for TSN reading. A work-around utilizing DTC information exchanges allowed for switching between two modes (group and single) without CPU intervention.
I trust this makes a difference.
Thank You
See lessThanks this information
Thanks this information
See less