Hello,
I’ve built a custom board with the ESP32-C3 and I intended to program( and debug) the ESP32-C3 only via USB.
Although it seems that to program the device the actually first time I need to hold the IO9 pin low. Indeed reading around in the forum it seems their people have to do it as well.
I would like to understand if it’s required and why it’s that, as I allowed the USB_JTAG core could directly flash the new firmware.
If verified this will slow down and complicate the mass production process of the final product as we need to drive an extra pin during programming (or perhaps add a button just for this reason).
Thanks for your help!!!
Nidhi