While trying to debug Renesas RA6M4 MCU using E2 Lite through SWD , but it is showing error Break at address “0x4bda” with no debug information available, or outside of program code. How to solve this issue?
Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
While trying to debug Renesas RA6M4 MCU using E2 Lite through SWD , but it is showing error Break at address “0x4bda” with no debug information available, or outside of program code. How to solve this issue?
Hi, Please check your below pin / connection is ok. 1. SWCLK 2. SWDIO 3. 3.3V 4. GND 5. RESET need pulled up and give small filter capacitor. 6. MD, need this pin as pullup. Please check this above pins and let me know if you have face any issues. Thanks & Regards Shivali Singh
Hi,
Please check your below pin / connection is ok.
1. SWCLK
2. SWDIO
3. 3.3V
4. GND
5. RESET need pulled up and give small filter capacitor.
6. MD, need this pin as pullup.
Please check this above pins and let me know if you have face any issues.
Thanks & Regards
Shivali Singh
See less