Hii Team,
Do Digital POL devices like TDA3860/ 740 devices work without a bleeder resistor on the output without affecting the operating system?
Thank you for your help.
Regards,
Vikas
Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
Hello@vikas, It's always recommended to use a bleeder of 100 ohms. Vout of the part has an offset of around 250mV due to a leakage in no-load condition. The 100-ohm bleeder will pull it down. If there's no issue with 250mV offset the part can be used without bleeder also. If there's a concern with eRead more
Hellovikas Nagpal,
It’s always recommended to use a bleeder of 100 ohms.
Vout of the part has an offset of around 250mV due to a leakage in no-load condition.
The 100-ohm bleeder will pull it down.
If there’s no issue with 250mV offset the part can be used without bleeder also.
If there’s a concern with effectiveness while using a 100-ohm bleeder also a 500-ohm bleeder can be used. 500-ohm bleeder will have an offset of 65mV.
Regards,
Ashish Gawade
See less