Welcome, to the community!

Well, LED2472G is a move register, but it can simply be used as similar to a limited extent the individual outputs (bits) are actually constant-current LED drivers, so they aren’t actually able for sense purposes. But of course, you can control the loads connected to the individual outputs logically in the same way as a shift register. Only the serial output is directly similar to a classic shift register.

Still, one could imagine using LED2472G to drive 30mA relays, indeed if this doesn’t correspond to the original purpose. But you mustn’t forget the usual free-wheeling diodes, which due to the unspecified avalanche energy should better be Schottky diodes because only they’re fast enough. Evenultra-fast diodes with a blocking time of 10.20 ns are probably too slow not to damage the respective LED driver- at least nothing guarantees that.

Does it answer your question?

Regards

Alex