Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
Reading the correct reset status from a Bootloadble project.
A global in both projects: CY_SECTION(".reset_info") volatile struct t_reset_info reset_info; Then in the linker script of each project: MEMORY { rom (rx) : ORIGIN = 0x0, LENGTH = 262144 ram (rwx) : ORIGIN = 0x20000000 - (65536 / 2), LENGTH = 65536 - 128 nld (rw) : ORIGIN = 0x20000000Read more
A global in both projects:
Then in the linker script of each project:
That way, it’s certain that the two programs will both have access to the same NOLOAD memory, and neither will corrupt it by having the memory used for anything else.
See lessGTM_TIM_Capture_1 example with different input pin
In the example, inside the function IfxGtm_Tim_In_initConfig(), the configuration is for TIM0 CH0 config->timIndex = IfxGtm_Tim_0;config->channelIndex = IfxGtm_Tim_Ch_0; IfxGtm_TIM1_1_P02_1_IN corresponds to TIM1 CH1.
In the example, inside the function IfxGtm_Tim_In_initConfig(), the configuration is for TIM0 CH0
config->timIndex = IfxGtm_Tim_0;
config->channelIndex = IfxGtm_Tim_Ch_0;
IfxGtm_TIM1_1_P02_1_IN corresponds to TIM1 CH1.
See lessPSoC interfacing with WiFi module over SPI
For the wifi chip that you want to use, driver should have the support or implementation of the interface that you need. For 43439, both the SDIO and SPI interfaces are supported between host and WLAN chip in WHD.
For the wifi chip that you want to use, driver should have the support or implementation of the interface that you need. For 43439, both the SDIO and SPI interfaces are supported between host and WLAN chip in WHD.
See lessRenesas RA2E2-No Write in Timer Order Analog Register Possible
You have to enable the GPT and/or ADC in the “Module Stop Control Register D".
Does CYBT-483039-EVAL board support sending API commands via serial terminal?
The device is configured as a peripheral role and CYSPP auto-start by default. When the module power on, you should see the device in your phone. Then you can connect to it and the CYSPP will auto start. You can also use the CYSPPSP to set the CYSPP configuration.
The device is configured as a peripheral role and CYSPP auto-start by default.
When the module power on, you should see the device in your phone. Then you can connect to it and the CYSPP will auto start.
You can also use the CYSPPSP to set the CYSPP configuration.
See lessesp_sleep_enable_uart_wakeup with CONFIG_CONSOLE_UART_CUSTOM configuration
You have to do this PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD_U0RXD); PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD_U0TXD);
You have to do this
RA FSP Azure Netx Duo Dynamic mac address
in the auto generated code ether_cfg_t::p_mac_address points to a non-const global variable :- Set the required MAC address in the global variable before calling nx_ip_create() (or attaching a new interface to an already existing NetX IP instance).
in the auto generated code ether_cfg_t::p_mac_address points to a non-const global variable :-
Set the required MAC address in the global variable before calling nx_ip_create() (or attaching a new interface to an already existing NetX IP instance).
See lessDC Motor Drive with PWM
As the DC motor is the simple one, it doesn't require any tricks to control. You just configure two PWM channels (or a single channel but with switchable outputs).
As the DC motor is the simple one, it doesn’t require any tricks to control. You just configure two PWM channels (or a single channel but with switchable outputs).
See lessPossibility of swapping between HCDC and HMSC
the current USB driver does not support multiple classes in USB Host mode, this includes the USB_Basic stack.
the current USB driver does not support multiple classes in USB Host mode, this includes the USB_Basic stack.
See lessBinary compression solution in the FSP
No - there are not compression APIs included with the FSP. There are many open source compression libraries that you can add to your FSP project.
No – there are not compression APIs included with the FSP. There are many open source compression libraries that you can add to your FSP project.
See less