Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How to Save Data After Power Off with RA6T1?
Hi Mr. Vikas , Pls confirm on how much clock frequency you are running CPU depending on clock frequency dataflash memory erase time changes pls let us know clock fequency first
Hi Mr. Vikas ,
Pls confirm on how much clock frequency you are running CPU
depending on clock frequency dataflash memory erase time changes
pls let us know clock fequency first
Start with Guiliani SDK and RA6M3?
Hi Ashish , Can you pls share your company name , location & project details etc we will support you for RA6M3 & guilani pls share details on sales@rabyte.com
Hi Ashish ,
Can you pls share your company name , location & project details etc
we will support you for RA6M3 & guilani
pls share details on sales@rabyte.com
See lessRenesas R5F10268A Programming Issues
Hi sir , I think there is connection issue , ensure programming connector is like below & your connection are tight , also check MCU is ok , if it will not work then change the board & try programming
Hi sir ,
I think there is connection issue , ensure programming connector is like below
& your connection are tight , also check MCU is ok , if it will not work then change the board & try programming
See lessDialog BLE Module use AT Command
Hi Sir , Yes you can use AT commands for Dialog BLE Refer below link http://lpccs-docs.renesas.com/UM-140-DA145x-CodeLess/atcommands.html Thanks !
Hi Sir ,
Yes you can use AT commands for Dialog BLE
Refer below link
http://lpccs-docs.renesas.com/UM-140-DA145x-CodeLess/atcommands.html
Thanks !
See lessRenesas RA2L1 Family MCU
Hi mr. Raja You have to make MD pin active low while SCI boot (flashing with UART ) & if you want to debug the make it high with 10 K pullup & isolate pull down resistor
Hi mr. Raja
You have to make MD pin active low while SCI boot (flashing with UART )
& if you want to debug the make it high with 10 K pullup & isolate pull down resistor
See lessHow to Erase my MCU (RA4M2)?
Hi Mohan , I think you have flashed .srec with security ID , try erasing full chip that option comes in RFP
Hi Mohan ,
I think you have flashed .srec with security ID , try erasing full chip that option comes in RFP
See lessDigital to analog converter
Hi , Have you checked Renesas RA MCU for DAC , this MCU having inbulit DAC with 16 bit SAR ADC RA2A1 - 32-bit Microcontrollers with 48MHz Arm® Cortex®-M23 and Integration of 24-bit Sigma-Delta ADC | Renesas
Hi , Have you checked Renesas RA MCU for DAC , this MCU having inbulit DAC with 16 bit SAR ADC
RA2A1 – 32-bit Microcontrollers with 48MHz Arm® Cortex®-M23 and Integration of 24-bit Sigma-Delta ADC | Renesas
See lessDefault value for RL78 Security ID?
By default for RL78 below is the security ID 0x00000000000000000000
By default for RL78 below is the security ID
0x00000000000000000000
See lessProgramming in Renesas RA6M1 using E2 emulator lite
Pls check for boot jumper refer below link to download E2 lite manual for connection reference https://www.renesas.com/in/en/document/mat/e2-emulator-e2-emulator-lite-additional-document-users-manual-notes-connection-ra-devices
Pls check for boot jumper
refer below link to download E2 lite manual for connection reference
https://www.renesas.com/in/en/document/mat/e2-emulator-e2-emulator-lite-additional-document-users-manual-notes-connection-ra-devices
See lessRenesas RA2E1 ADC Internal Ref Voltage
Hi dev , refer below link & download user manual hardware for RA2E1 & there is table given on page 1003 for ADC internal reference https://www.renesas.com/us/en/document/man/ra2e1-group-users-manual-hardware Thanks
Hi dev ,
refer below link & download user manual hardware for RA2E1 & there is table given on page 1003 for ADC internal reference
https://www.renesas.com/us/en/document/man/ra2e1-group-users-manual-hardware
Thanks