Sign Up to our social questions and Answers Engine to ask questions, answer people's questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people's questions & connect with other people.
Volt.Tech
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
How does the Eval- scs001v1 auto- select the voltage output demanded?
EVAL- SCS001V1 is grounded on the STUSB4500, which can store three PDO profiles( power data objects) in its NVM and informs the connected power force( source) of the voltage and current to be supplied. Since the EVAL- SCS001V1 has no information about the needed voltages and currents of the connecteRead more
EVAL- SCS001V1 is grounded on the STUSB4500, which can store three PDO profiles( power data objects) in its NVM and informs the connected power force( source) of the voltage and current to be supplied.
Since the EVAL- SCS001V1 has no information about the needed voltages and currents of the connected loads( sinks,e.g. your UNO), these values have to be stored in the NVM of the included STUSB4500. Programming can be done. g. with the GUI STSW- STUSB002.
See lessAs soon as the EVAL- SCS001V1 with your UNO board is connected to the USB- C power force, the set power can be requested.
Is ESP32-S3-EYE a Real Board?
Hello Yes ESP32-S3-EYE is real! EN docs should be available this week.
Hello
Yes ESP32-S3-EYE is real! EN docs should be available this week.
See lessL6920 DC – DC Converter
Hi Ashish, However, you would notice that LBI input is connected to LBO output and that's the only purpose of this input, If you look into the block diagram of L6920 in its datasheet. LBI input doesn't shut down the output! Still, you need to use LBO output to shut down accordingly, If you require tRead more
Hi Ashish,
However, you would notice that LBI input is connected to LBO output and that’s the only purpose of this input, If you look into the block diagram of L6920 in its datasheet. LBI input doesn’t shut down the output!
See lessStill, you need to use LBO output to shut down accordingly, If you require to shut down the output.
RA4M3 MCUBoot with external secondary slot in QSPI and coded with ECISE
Hi, What have you got the heap set to in the BSP settings? For ECIES more heap is needed than just ECC and AES along. Try 0x1000 and see if it works( doesn't need to be this large but reduce it once it's working). If you still have problems let me know and I'll put a demo together.
Hi,
What have you got the heap set to in the BSP settings? For ECIES more heap is needed than just ECC and AES along. Try 0x1000 and see if it works( doesn’t need to be this large but reduce it once it’s working).
See lessIf you still have problems let me know and I’ll put a demo together.
How to Connect OTA through GSM
There's no difference between doing it through GSM or wifi or ethernet, any http functions including OTA will just use whatever interface is configured. You should just have to run esp_https_ota( & config) nearly in your app and it'll work.
There’s no difference between doing it through GSM or wifi or ethernet, any http functions including OTA will just use whatever interface is configured.
See lessYou should just have to run esp_https_ota( & config) nearly in your app and it’ll work.
RA2A1- CAN Machine between 2 RA2A1 MCUs
To receive messages you have to set up the acceptance filters, so that it knows which communication figures to receive, and where to put the received messages.
To receive messages you have to set up the acceptance filters, so that it knows which communication figures to receive, and where to put the received messages.
See lessReserve ROM area in linker
If you already start your section at 0xFFF80010, as far as this project is concern, 0xFFF80000~0xFFF8000F doesn't exist. Isn't this what you want? You choose the start of ROM. If you want to make a middle section disappear, ROM = 0xFFF80000 - 0xFFF8FFFF ROM2=0xFFF90010 - 0xFFFFFFFF use cpu = stridRead more
If you already start your section at 0xFFF80010, as far as this project is concern, 0xFFF80000~0xFFF8000F doesn’t exist. Isn’t this what you want?
You choose the start of ROM. If you want to make a middle section disappear,
ROM = 0xFFF80000 – 0xFFF8FFFF
ROM2=0xFFF90010 – 0xFFFFFFFF
use cpu = stride so the middle section is un-assigned.
From ccrx manual
.section C, ROMDATA B is for RAM. C=constant.
See lessERROR CONNECTING TO E1 DEBUGGER IN CS+
Do you have the connect settings allowed to set the OPJTAG? The error is usually caused by improperly set debug config in the option bytes, but having this setting for the debugger will allow it read, confirm, and update the values if necessary.
Do you have the connect settings allowed to set the OPJTAG?
The error is usually caused by improperly set debug config in the option bytes, but having this setting for the debugger will allow it read, confirm, and update the values if necessary.
See less